Ford Focus ST Forum banner
1081 - 1100 of 1121 Posts

·
Premium Member
Jason SB MK3 RS
Joined
·
2,999 Posts
I won't be going over there, I bought it out of necessity really, why do you want to swap it with your RS......you will have to add some money too.
Haha no thanks Its becoming a good investment the RS the way the value is going up...just over 7k in 5 months :)
 

·
Premium Member
Joined
·
966 Posts
Sport cat and downpipe from Andy @ A&K

1F4E9284-B1EE-424A-B794-209B7D453A4D.jpeg
83C63382-7F6E-48F2-AF49-B5D0AC24A693.jpeg

Ford RS airbox screws
17752B5E-6D73-45D1-BF44-1F3B1E820613.jpeg

RS ECU holder
B13E2F72-AE54-415D-8538-474D3AB7F56C.jpeg

Just waiting for the rubber grommets for the airbox to sit on the battery tray to arrive, then I just need the hoses and I'll be ready to install!

Front under tray fixings, not genuine ford but decent quality ones

A7D9741D-DC9E-4330-91A1-CF42F53BA3AF.jpeg

And finally 2 genuine ford rear undertray plastic fixings, the rear 2 plastic nuts are different to the rest and aftermarket wasn't available.

F7B0D8C5-BA82-4AB9-91A4-BFF2B4F4AC30.jpeg
 

Attachments

·
Premium Member
Joined
·
966 Posts
Selection of nuts and bolts from ford, ahead of time for when I rebuild the rear subframe, although just noticed they have sent 1 bolt wrong!
Also exhaust shield nuts as I have a few missing and some I want to replace, plus the rs air box rubber grommets.

3D483994-7D98-4BD3-8824-11DC0184D0B0.jpeg

Pro hoses cold side boost hose, without symposer, wanted black for an oem look but it seems difficult to get hold of them in black without waiting a while so opted for blue which was in stock.

7143F946-D89D-47A2-B67F-9B7F30C55559.jpeg

New Bosch lambda sensor
11FC0B20-A848-4B53-8DF7-F419412CF9A7.jpeg

RS style vac pipe
04A80073-8A1B-42D0-9BC1-3030923CB93F.jpeg
 

Attachments

·
Premium Member
Joined
·
32 Posts
Morning

That looks good, how easy was it to fit? Bit undecided still and wondering what it would look like if it was SG like the rest of the Spoiler......
 

·
Premium Member
Joined
·
308 Posts
Morning

That looks good, how easy was it to fit? Bit undecided still and wondering what it would look like if it was SG like the rest of the Spoiler......
Very easy to fit as in the vid below, I'd like to think I did it with a but more finesse to get it precise but the same method.

 

·
Premium Member
Joined
·
4,339 Posts
Some of the methods shown on YouTube raise my eyebrows. Not all from enthusiastic owners at home, some from paid professionals.
 

·
Premium Member
Mk3.5 MP/275
Joined
·
764 Posts

Attachments

·
Premium Member
ST225 - CP340
Joined
·
1,107 Posts
Massive box containing the large rear exhaust heat shield. No pic as it went straight in the garage!

Also arrived was the new coolant reservoir and cap!

Ready for her sidegrades later in the month now!!
 
1081 - 1100 of 1121 Posts
Top