[Therion]

Hi guys, i'd like to ask which steering wheel control kit you bought , or recommend, for a 2-DIN Pioneer source. (Avic F910BT).

I found at least 3 on ebay and from what the seller sais, they all do the job :

1) http://cgi.ebay.co.uk/FORD-Focus-Car-Steer...=item3ef6a3154d

2) http://cgi.ebay.co.uk/FORD-Focus-Stalk-Ste...=item3ca1dd2fa7

3) http://cgi.ebay.co.uk/PIONEER-FORD-Fiesta-...=item518dda04a4

And since price-wise they are practicaly the same, i dont know which is better, if any. If anyone has purchased one of these ,and is happy with it, at least perhaps i can pick that..

 

[Therion]

Nobody?

 

[Stargazer30]

Hi,

Its the first link you want, the one called.

FORD Focus Car Steering Wheel Stalk Adaptor PC99-X50

The PC99-X50 is the autoleads made interface that converts the stalk signals to something the HU will understand. But it doesn't include the lead that plugs into the X50 to the HU. Each HU make has a different one but they are only about £5. The pioneer one looks like a headphone plug. #

The second link looks iffy no picture of the X50 adaptor but it has the pioneer lead (which is no use without the X50 box!)

The third link looks like its not for a new style focus as theres no quad block for the loom.

Oh if you check the FS section I just put everything you need up for sale BTW Mind you I did think the stalk adaptors were £40
new not £20! Guess they've gone down a bit.

 

[Therion]

Thanks, you've got pm

 

[Stargazer30]

QUOTE(Therion @ 27 Jan 2010, 08:35 AM) <{POST_SNAPBACK}>Thanks, you've got pm

Erm no I don't will try to PM you...