Ford Focus ST Forum banner
1 - 20 of 96 Posts

·
Registered
Joined
·
800 Posts
Today i took the plunge and decided to strap down the ST and find out just what sort of figures its making and from the results which direction to take next with regards to tuning.

I was also supposed to be having a Collins uprated actuator fitted but after a small conversation with Gary we decided that it wasn't worth doing in light of the recent issue i have had with overboosting.

A Few pics of the morning...

Wheel Car Tire Land vehicle Vehicle
Tire Car Wheel Vehicle Vehicle registration plate
Tire Automotive tail & brake light Vehicle Automotive lighting Wheel
Automotive parking light Tire Wheel Automotive side marker light Car

The Results:- 340BHP - 402.4 lb ft
Rectangle Slope Font Plot Parallel
Rectangle Screenshot Operating system Font Software

Very happy with how the car performed, Martin said himself its the best one he's seen on the dyno running CP320. Big thank you to Gary and Martin for all your Work, help, parts and advice in getting this car to where it is now, next step is handling!
 

Attachments

·
Registered
Joined
·
800 Posts
Discussion Starter · #5 ·
Cheers guys, i was very surprised myself!

Mods are:-

Collins Level 2 Software
Radtec Intercooler
Mongoose downpipe
Cobra De-cat
Dreamscience Cat-back (resonated)
Dreamscience Induction kit
RS Clutch
 

·
Registered
Joined
·
800 Posts
Discussion Starter · #7 ·
This should be good Danny when the rolling road experts arrive.

Now Mofisto (Alex) will be convinced he has 360bhp


Magic ones
Haha well he has a boost issue too so must be that they are the fastest ones!
 

·
Registered
Joined
·
800 Posts
Discussion Starter · #9 ·
Collins obviously don't need to develop the cp340 kit then lol

Quite a high gearbox loss at 52bhp though
Well its got me thinking what figures it would be making with the CP340 kit?! but i'm done with power now, next step is B8's and a Diff!
 

·
FocusSTOC Nut!
Joined
·
17,448 Posts
Well its got me thinking what figures it would be making with the CP340 kit?! but i'm done with power now, next step is B8's and a Diff!
The extra BHP is irrelevant!
Torque is the daddy and yours is where it should be with Collins stage 2

Some engines are stronger than others and yours must have been built by the only guy at Volvo who knew what he was doing
 

·
Registered
Joined
·
6,751 Posts
Cheers guys, i was very surprised myself!

Mods are:-

Collins Level 2 Software
Radtec Intercooler
Mongoose downpipe
Cobra De-cat
Dreamscience Cat-back (resonated)
Dreamscience Induction kit
RS Clutch
Mate I jealous before I fitted my decat I had exact same mods as you except for rs clutch and only did 275bhp and 330ft torque cp320 map.

Since going on the rollers now have mongoose decat and rear section. Clutch is slipping now after decat hopefully get more on 300+ bhp once rs clutch goes on.

340bhp great figures.
 

·
Registered
Joined
·
4,115 Posts
Haha well he has a boost issue too so must be that they are the fastest ones!
Indeed I do, it's still overboosting in high gears at, err, completely legal speeds
. The tweaked stage 2 hasn't worked for me, so might have to go back to stage 1 for a while. Hopefully Martin is going to have another play with the parametersand then i can go back to stage 2.
 
1 - 20 of 96 Posts
Top