[Huigie]

When we reinstalled the turbo on my car we reinstalled a small metal pipe that goes from the turbo into the engine. Between the turbo and the pipe was a green gasket, it is the other side of the pipe that worries me. It's seems to be a really loose fit into the engine, we could not discover any rubber it would slide into.

Is it suppost to fit like this?

 

[Huigie]

kick

 

[troy45]

Try dropping Wolfman a pm mate, he may be able to help

 

[menzies26]

Yes there are supposed to be "O" rings on the end of the pipe that goes into the block.

 

[wolfman]

There should only be a single green o ring seal - there is very little pressure on this pipe as it is the turbo oil return feed pipe back into the sump.

We always use a new seal as when we tryed re-using seals they have leaked