Ford Focus ST Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter · #1 ·
Hey folks,

I had the pleasure off borrowing a Focus ST-3 the last few days and its really impressed me.

The car i borrowed had aprox 260bhp, all the toys and it was such a pleasure to drive.

I dont know anything about ST's so i hope someone can help a potential new owner.

The only thing thats going to put a stop to me buying one will be the tunning ability.

Who maps these cars and what software is used.? Is the OEM ecu capable off being re-flashed.? if so how mappable is it? I require something with unrestricted access to ignition / fuel / wastegate tables etc.
 

·
Registered
Joined
·
81 Posts
Discussion Starter · #3 ·
QUOTE(Rab ST @ 1 Dec 2009, 10:21 PM) <{POST_SNAPBACK}>the st will make 330bhp before a turbo req.
very tunable.

Sorry I should have been more clear in my requirements.

I want a solution to re-flashing the ecu with a map that I would create.

I'd need to know what software is available for the ST and which re-flash cable is required. Has anyone tried pulling the ROM from an ST Ecu to disassemble it.
 

·
Registered
Joined
·
7,987 Posts
QUOTE(rob2006 @ 1 Dec 2009, 10:48 PM) <{POST_SNAPBACK}>Sorry I should have been more clear in my requirements.

I want a solution to re-flashing the ecu with a map that I would create.

I'd need to know what software is available for the ST and which re-flash cable is required. Has anyone tried pulling the ROM from an ST Ecu to disassemble it.

Hiya Rob and
to the
club

Whilst I am unable to help with your question above, if you are serious about buying an
, it may be worth you signing up here as an Owner Member. It only costs £10 but will allow you access to all of the technical areas of the forum and also to the club sponsors - many of whom know a thing or two about re-mapping
 
1 - 4 of 4 Posts
Top