Ford Focus ST Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
1,371 Posts
Gary at Collins fitted mine on a ramp with just undertray removed. Hardest part was getting standard one off due to a rusty clip
And had to cut the old one off in the end
 

·
Registered
Joined
·
346 Posts
My radtec took 1.5 hours faf'ing about and relocating my horn to below the n/s headlight, but as said, no need to remove the bumper.
 

·
Registered
Joined
·
272 Posts
My forge race spec cooler needed the bumper off and dropping the core support to be able to get the lugs over the hooks on the radiator. Was a right pain! An airtec or similar size one would be a doddle.
 

·
Registered
Joined
·
86 Posts
I fitted the R sport to mine last weekend, it was fairly easy TBH, the worst bit is getting the old one off

The Rsport has a threaded hole on top ready for the horn relocation, they even supply the bolt with it.
 

·
Registered
Joined
·
6,843 Posts
Fitting the intercooler is by far one of the easier mods to do on the ST

I had mine fitted by PB and it took less than an hour
 
1 - 15 of 15 Posts
Top