Ford Focus ST Forum banner

Fitting A Dv "y" Piece...

125 Views 0 Replies 1 Participant Last post by  JayDon
Hey guys
Thinking of refitting my Forge Dump valve, but this time using one of the silicone Y piece hoses so i can keep the symposer pipe attached too.
Question is, is there any point keeping the pipe connected, when in order to fit the DV I have removed the box with the rubber diaphram in (which is the actual symposer and which creates the noise we all like).
Or am i wrong.... and the Rectangular black box stays where it is... then the Y piece with the DV on one end, and the plastic pipe (which carries the noise to the bulk head) on the other end of the "Y".
Im thinking out loud!

EDIT: Please ignore the above.... i think i understand it all now! Just need to obtain a "Y" section from Bailey...
See less See more
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.