Ford Focus ST Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
279 Posts
Discussion Starter · #1 ·
iv got bluefin stage 3 plus, does anyone no what the performance bhp/lbft,
also running vpower
milltek turbo back with 200cell high flow cat
forge intercooler
sealed cold air induction

look forward to hearing the results,

Thanks Adam
 

·
Registered
Joined
·
688 Posts
QUOTE(troy45 @ 1 Jan 2010, 11:00 PM) <{POST_SNAPBACK}>Think I got 293 for some of my runs with Bluefin Stage 3+. Or 267 or 277 depending on which dyno lottery machine you pick lol

always use the same dyno dynamics rollers at hayes engineering in erith.
 

·
Registered
Joined
·
3,635 Posts
QUOTE(adamellen @ 3 Jan 2010, 10:58 AM) <{POST_SNAPBACK}>the power on there was for stage 2 low tourqe, not that simple....

i actually got about 5 bhp less running level 3
than level 2
both runs at rick woods stockport, about a year or so apart

same mods both times, as in signature,
although i would say the level 3 is definatly more powerfull than level 2

i cant remember the exact figures but the first run was 289.0 bhp iirc
second one must have been 284 bhp ish
 

·
Registered
Joined
·
688 Posts
QUOTE(jonn @ 3 Jan 2010, 12:13 PM) <{POST_SNAPBACK}>i actually got about 5 bhp less running level 3
than level 2
both runs at rick woods stockport, about a year or so apart

same mods both times, as in signature,
although i would say the level 3 is definatly more powerfull than level 2

i cant remember the exact figures but the first run was 289.0 bhp iirc
second one must have been 284 bhp ish

i bet you got more torque on the stage three
 
1 - 13 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top