Ford Focus ST Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
67 Posts
Discussion Starter · #1 ·
Hi everyone. Just a question, im in desperate need for 10 inlet and 10 exhaust valves for my 07 plate st. Just wondering if anybody else on here has ever bought valves? Had a quick look on the internet and seen prices for 20 quid per valve, coming t a total of 400 quid for a set of valves!

Any help would be greatly appreciated!
 

·
Premium Member
Graham - mk2 stage 3
Joined
·
5,228 Posts
Sounds about right. If you have bent valves, chances are the valve guides, pistons and maybe the con rods are going to be damaged too, unless the engine was only ticking over when the cause of the bent valves happened.
 

·
FocusSTOC Nut!
Joined
·
17,448 Posts
Hi everyone. Just a question, im in desperate need for 10 inlet and 10 exhaust valves for my 07 plate st. Just wondering if anybody else on here has ever bought valves? Had a quick look on the internet and seen prices for 20 quid per valve, coming t a total of 400 quid for a set of valves!

Any help would be greatly appreciated!
It would probably be cheaper buying a second hand cylinder head mate.
Join up as a member and put an add in the wanted section. Im sure some of the guys who have had liner problems might have a cylinder head knocking about
 

·
Registered
Joined
·
67 Posts
Discussion Starter · #4 ·
Sounds about right. If you have bent valves, chances are the valve guides, pistons and maybe the con rods are going to be damaged too, unless the engine was only ticking over when the cause of the bent valves happened.
Im a mechanic mate ive got it striped no other damage just the bent valves!
 

·
Administrator
Mk2 RS MP350
Joined
·
24,589 Posts
A wanted advert would help but you may also get somewhere by talking to some of our sponsors as they routinely have spare engine parts.
 

·
Registered
Joined
·
67 Posts
Discussion Starter · #6 ·
It would probably be cheaper buying a second hand cylinder head mate.
Join up as a member and put an add in the wanted section. Im sure some of the guys who have had liner problems might have a cylinder head knocking about
Cheers mate sounds like a good idea never thought of that. Cheers
 

·
Registered
Joined
·
58 Posts
Hi everyone. Just a question, im in desperate need for 10 inlet and 10 exhaust valves for my 07 plate st. Just wondering if anybody else on here has ever bought valves? Had a quick look on the internet and seen prices for 20 quid per valve, coming t a total of 400 quid for a set of valves!

Any help would be greatly appreciated!
There you go http://www.ebay.co.uk/itm/GENUINE-FORD-FOCUS-ST-2-5-VOLVO-R-PETROL-TURBO-CYLINDER-HEAD-2005-/121042814717?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c2eb6c6fd
 

·
Registered
Mk2 RS 400
Joined
·
4,188 Posts
If he valves are bent then its likely the guides are also damaged, but its next to impossible to say its not by simply looking at them.
 
1 - 20 of 20 Posts
Top