Ford Focus ST Forum banner
1 - 16 of 16 Posts

·
Registered
ST225 modified
Joined
·
4,248 Posts

·
Registered
Joined
·
165 Posts
Have to say if ford bring this out and it has the same performance as the ST, but with better economy, (although probably a 4 cyl engine), I'll be saying goodbye to the Focus ST.
 

·
Registered
ST225 modified
Joined
·
4,248 Posts
Hirvonen still heads the overall standings by 47.7 seconds following Thursday's six stages...




As for Ford producing a road-going version... I dont think its gonna happen, or at least nothing that really looks and goes like the S2000


Maybe a 200bhp 1.6T with a bit of a bodykit is the best we can hope for
 

·
Registered
ST225 modified
Joined
·
4,248 Posts
Technical Specification
Ford Fiesta S2000 Technical Specification

Engine:
Ford 1998cc Pipo built I4 Duratec S2000 engine. Four cylinders, 16 valves.
Bore 87mm. Stroke 83mm. Cosworth electronics engine management system. Catalytic converter.

Power:
280 bhp at 8000 rpm.

Torque:
260 Nm at 6500 rpm.

Transmission:
Permanent four-wheel drive. M-Sport / Xtrac six speed sequential gearbox with AP clutch.

Suspension:
Front and rear: MacPherson struts with Reiger external reservoir dampers, three-way adjustable. Fully adjustable fabricated steel links. Front and rear anti-roll bars. Machined aluminium uprights.

Brakes:
Gravel (front and rear): 300mm Brembo ventilated discs with Brembo four piston monoblock calipers.

Asphalt (front ): 355mm Brembo ventilated discs with Brembo four-piston monoblock calipers.

Asphalt (rear ): 300mm Brembo ventilated discs with Brembo four-piston monoblock calipers.

Hydraulic handbrake.

Steering:
Power-assisted high-ratio (12:1) rack and pinion. One and a half turns lock to lock.

Wheels:
Gravel: 7in x 15in (aluminium) wheels with 650mm tyres.

Asphalt: 8in x 18in (magnesium) wheels with 650mm tyres.

Bodyshell:
Unitary construction. Unique composite side panels. Welded T45 steel safety roll cage. Aerodynamic rear wing. Unique front 'bumper' treatment.

Electronics:
Full Cosworth electronics data acquisition for on-event diagnostics and performance development.

Fuel tank:
FIA FT3 tank, 80 litre capacity, located centrally.

Dimensions: Length: 3958mm. Width: 1820mm. Wheelbase: 2489mm. Weight: 1200kg minimum.

Awesome piece of kit
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top