Ford Focus ST Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 17 Results
  1. Mk2 Engine, Exhaust and Induction
    Hello there, First of all, apologies if some of these questiosn have already been answered, but I couldn't find exact information I'm looking for 1. If I have a stock downpipe and cat, but I have a 2.5" Scorpion cat back, will any high flow cat/decat fit my exaust? Both 3"/2.5"? What I mean is...
  2. Mk2 Miscellaneous
    Hi there. I had my ST remapped recently (custom stage1 ~255hp). And now I'm planning to put a RamAir filter + Scorpion non-res cat back exhaust. Would these two upgrades increase any performance considering the car will have a better airflow? Or is it necessary to remap the car again to see any...
  3. Focus ST Mk2 Non Technical Discussion
    Another wicked sounding 2.5 engine, what do you think to this noise? BEAST
  4. Mk3 Petrol Engine, Exhaust and Induction
    Does anyone have any experience of both these exhausts and if so which did you think sounded better?
  5. Mk2 Engine, Exhaust and Induction
    I've currently got a 3" downpipe and decat fitted and I'm looking at finishing the exhaust off with a cat back system. Before I part with £500+ I want to make sure I choose the right one! I'm after some pops and bangs and a fairly aggressive note, but at the same time I do spend some time on...
  6. Focus ST Mk2 Non Technical Discussion
    Hi guys Just doing some research on exhausts, and trying to get an idea on the sounds. The videos are a good start, but are only as good as the microphone used to record them and the speaker quality to play them back with. In in no rush to change yet, as I already have the full Mountune...
  7. Mk2 Engine, Exhaust and Induction
    Hi I have looked through the Internet (obviously not all of it) to try to find out what exhaust the mountune is? I have heard that it is a miltek just rebranded? Or is it a mongoose? Thanks
  8. Mk2 Engine, Exhaust and Induction
    Hi All, Had my DS Cat back fitted for year and have noticed the edge of one the exhaust tips is stating to rust has anyone else suffered with this? I wouldn't expect rust on quality product, and certainly not within a year! Cheers Mark
  9. Mk2 Engine, Exhaust and Induction
    Hi Guys, First may I wish you all a very happy Christmas and all the best for the New Year. Secondly, I appologise for yet another post about exhausts... Looking for some advice in terms of these two cat back systems. I don't really know what the real difference is other than 100 smackers...
  10. North Scotland
    Is there anybody in the Aberdeen area that has the Milltek Ultimate cat-back fitted? I'd like to hear it in person, hear what it's like just around town and when hammering it before I buy! So, if anybody fancies a passenger for 10minutes who has one I'd be very thankful!
  11. Mk2 Engine, Exhaust and Induction
    Right, decision time! Which cat back; milltek non-res, or milltek ultimate??? What are people's experience with both; noise / low rev noise / drone in the cab when cruising etc...?
  12. Image, Photoshop & Video Gallery
    Finally got it fitted after a week of it sitting in the shed waiting for snow to off!. What can I say? it. looks the dogs danglies imo I'm well chuffed! it'll need a few miles to coke up and quieten down a bit but it has a great tone, really gets going when you plant it! Next: downpipe, sports...
  13. Mk2 Engine, Exhaust and Induction
    Hi, Gona be getting a cat back fitted to my car probably a dreamsceince just wondering if the origional back box and pipe work the garage removes to fit the new cat back will fit in my ST boot to bring home? Cheers
  14. Mk2 Engine, Exhaust and Induction
    HI EVERYONE!!! Cut a long story short! I want an exhaust (with a de-cat) Non Resonated but without any of the majorly feared Motorway Droning (can obv cope with a bit but nothing over the top). Was looking at a Full Mongoose but my mate says theyre so bad for Droning (but I love the 4" rolled...
  15. Mk2 Engine, Exhaust and Induction
    Hi guys! Was looking at getting a Cat back (Mongoose) for my ST3. Obviously gonna get the Full system at some point and I know a Cat Back is just for looks, but I want one :-) If I buy one will it bolt straight on to my existing exhaust pipework? I know the bore is larger. p.s anyone got any...
1-15 of 17 Results
Top