Group A Induction Kit Focus ST - Page 2 - JW Racing - Focus ST Owners Club

Jump to content

Group A Induction Kit Focus ST

- - - - -

  • Please log in to reply
309 replies to this topic

#16
Jamescst3

Jamescst3
  • Forum User
  • 7012 posts
I may be interested in this depending what comes out. Would be very interesting if you could come up with something which involves the Elevate crossover pipe you guys sell or a similar pipe?

Advertisement

Advertisement
  • Advertisement

#17
JW Racing

JW Racing

    JW Racing

  • Sponsor
  • 1085 posts
  • Dunstable
  • Jason
  • Owns:Focus RS Mk3
Ok guys we are getting a lot closer with this kit, all we need to do now is to work out which extra parts we may add to the kit, been looking at the following parts to be considered:

Elevate Large Bore Intake Pipe
RS ECU Cover
K&N Filter Dry Charger
Cold Air Feed
RS Brake Booster Pipe (The one that comes off the end of the intake manifold)

#18
Jamescst3

Jamescst3
  • Forum User
  • 7012 posts

Ok guys we are getting a lot closer with this kit, all we need to do now is to work out which extra parts we may add to the kit, been looking at the following parts to be considered:

Elevate Large Bore Intake Pipe
RS ECU Cover
K&N Filter Dry Charger
Cold Air Feed
RS Brake Booster Pipe (The one that comes off the end of the intake manifold)


For me the Elevate large bore intake pipe would be a must.

I won't be fussed about a RS ECU cover but I think those still with the standard air box would want it.
I don't think the Dry charger would be required
Cold Air feed would be good as long as the price was good, if it was priced to high I would make my own though.

All just my own thoughts of course. :)

#19
JamP1987

JamP1987
  • Forum User
  • 898 posts

:unsure: The main problem seems to be the 90 degree bend just before the MAF sensor Lee. I was talking to another supplier about doing a kit but they have tried and couldnt get a decent result!


Just run RS maf and there's no problem at all

#20
ST-Chris

ST-Chris
  • Forum User
  • 766 posts
  • Deeside
  • Chris
  • Owns:None

Im interested in this, not too keen on fitting a dreamscience induction. I do have a dreamscience crossover pipe, does anyone know if i could fit the crossover pipe with a silicone elbow and a group A filter just behind headlight. im after the increased induction flow and noise without the risk of water intake from driving through puddles,

thanks, James

I tried this.. Kept getting esp faults and wouldnt boost past half

Stuck ds bottom pipe back on and all was fine...

#21
JamP1987

JamP1987
  • Forum User
  • 898 posts
Just seen on Facebook.. AS have already got this kit..
  • A and K Motorsport likes this

#22
ST-Chris

ST-Chris
  • Forum User
  • 766 posts
  • Deeside
  • Chris
  • Owns:None

Just seen on Facebook.. AS have already got this kit..

link?

#23
JamP1987

JamP1987
  • Forum User
  • 898 posts

link?



It's on the AS Facebook page.. If JWR develope this like they do all theyr stuff you'll be waiting years for it :P

#24
ST-Chris

ST-Chris
  • Forum User
  • 766 posts
  • Deeside
  • Chris
  • Owns:None
Searched for AS but cant find them lol whats the name of the page

#25
JW Racing

JW Racing

    JW Racing

  • Sponsor
  • 1085 posts
  • Dunstable
  • Jason
  • Owns:Focus RS Mk3

It's on the AS Facebook page.. If JWR develope this like they do all theyr stuff you'll be waiting years for it :P


Were actually in the finishing stages of this, we do try to do the best job we can rather than rush something out there. We are going to be test fitting this evening to give an idea.
  • 07stash likes this

#26
07stash

07stash
  • Forum User
  • 2733 posts
  • Reading
  • Ashley
  • Owns:ST225

Searched for AS but cant find them lol whats the name of the page


Dunno if this will work as on my phone ;)

https://m.facebook.c..._user=752414326

If not just type auto specialists in the search on FB and it's 3rd result down :thumbsup:
  • JamP1987 likes this

#27
JamP1987

JamP1987
  • Forum User
  • 898 posts

Were actually in the finishing stages of this, we do try to do the best job we can rather than rush something out there. We are going to be test fitting this evening to give an idea.


Would be good for you's to get one out there as well because it might help the price if you both sell it

#28
JW Racing

JW Racing

    JW Racing

  • Sponsor
  • 1085 posts
  • Dunstable
  • Jason
  • Owns:Focus RS Mk3
Ok well ideally this thread isnt about another manufacturers parts or similar ideas, to the best of my knowledge nothing has been made there end at the moment maybe they just caught wift that we were looking into this and decided it was a good idea to look into doing their own version.

As mentioned we will be doing a bit of test fitting this evening, we are using all named brand parts with our kit from the likes of K&N, Roose Motorsport, Elevate etc so will be worth the wait.
  • ashst3, 07stash, Jamescst3 and 1 other like this

#29
JW Racing

JW Racing

    JW Racing

  • Sponsor
  • 1085 posts
  • Dunstable
  • Jason
  • Owns:Focus RS Mk3
Ok guys so after a fair few hours in the garage yesterday we have managed to complete our Group 'A' Air Induction kit for the Focus ST225, after lots of testing and suggestions of what to include in the kit we deciding which route to go down with additional parts etc. We decided in aid of trying to keep the costs as low as possible for you guys and save over complicating things we have come up with 2 options, basically it will be offered with or without the Elevate large bore intake pipe so can be used on stock intake pipe if you do not wish to purchase the Elevate part of the kit.

To further aid keeping the costs down for you guys we have decided to offer an introductory 20% off on this kit to the first 10 orders ! Here is all the info below.


Posted Image

JWR Group 'A' Induction kit for the Focus ST225, this is a brand new product developed by us at JW Racing after various interest shown to develop this kit by many owners and customers.

For those of you wanting some serious induction noise and to hear the wastegate chattering away this is the filter kit for you.

Highest quality parts used in every aspect so includes a Genuine K&N air filter, silicone hoses from Roose Motorsport and intake pipe from Elevate. The filter sits nicely in place behind the headlight and is arguably the 'BIGGEST' filter to be available for the Focus ST yet !


We offer this in 2 different options, either as a basic induction kit using the stock air pipe to the turbochager or as the full kit with the Elevate Top Induction Pipe included

*Focus RS ECU Cover is needed to fit this kit, we can supply this if needed*

INTRODUCTORY PRICE:


(Without Elevate Pipe) £135.36 inc vat
(With Elevate Pipe) £276.12 inc vat


http://j-w-racing.co...__ford_focus_st


Posted Image
Posted ImagePosted Image
  • Bodge and retribution121 like this

#30
JamP1987

JamP1987
  • Forum User
  • 898 posts
Looks good.. Think this will take off in the same as it did with the RS's




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users